What happens when you order tooling from a tool vendor? Mike visited Iwen Tool Supply to get a behind the scenes look at the process that keeps our machines stocked and ready to roll. Video Transcript: All right everybody, we’re back at Ian Tool. I’m back...
While ordering tooling online may seem convenient, there are many benefits of working with a tool vendor. We visited our tool vendor Iwen Tool Supply and spoke with VP Travis Thayer about how they provide expertise and service beyond what an online retailer can offer....
We invited Chuck Austerberry from Dynamic Machine to demonstrate how to align and adjust a Citizen Swiss Lathe from start to finish. In this video, we go through each an every step in detail to ensure you know how to accurately and safely get your Citizen Swiss Lathe...
Is your Advant Edge CNC Tool Dressing Machine getting a little dirty, not operating smoothly, or isn’t holding the too, holder quite right anymore? Learn, step by step, how to properly clean yours properly Video Transcript: So, you’ve had your AdvantEdge...
Thanks to Dave, Kremin’s “favorite” sales guy, the Inconel journey continues. The issue Mike has this time; roughing, or the Dynamic Milling of Inconel on our Haas VF2 CNC Mill. The end mills he’s using keep breaking, plus the edges and faces of the part aren’t up to...
If cutting Inconel is a headache, then slot milling Inconel is a full-blown migraine—at least for Mike at Kremin. Everything he was throwing at this Inconel job on the Haas VF2 CNC Mill wasn’t working, so Trevor brought in the big guns: Steve Oszust, Product...
In today’s Quick Tip, Brad will teach you how to download programs to your CNC machine using Cimco’s DNC-Max software. Video Transcript: If you’ve seen our product review of the Simco software we recently bought, you know it has helped us be more efficient and...
Looking for DNC communication software for your CNC machines, Robots, or PLCs for your shop? Kremin can help you narrow it down. We recently picked up Cmico DNC-Max to gain more control over our programs, as well as clean up our electronic mess. Not going to lie,...
It’s way too easy to let your shop get messy. In today’s quick tip, Brad shows you how Kremin just organized their Collet and Guide Bushings to save a TON of time. After all, the more time you spend looking for things, is less time spent making things. Video...
Sometimes you need to pick off a square part out of round material on a Swiss Lathe. And in this tip, Lance will tell you what kind of collet you need to use, and how to do a phase adjustment with the sub-spindle and the main spindle – a key step in getting this...
