Just how easy is it to operate the Load & Go series from Automation Within Reach? We show you in this short video!

 

Video Transcript:

“Hey everyone, this is Trevor from Kremin again. Today, I’m going to give you a demonstration and show you how easy the Load & Go from AWR is to operate. Check this out.

All right, I’m going to show you how easy it is to love a robot.

So all you have to simply do is pick your file that you want to use. Walk through the progressions of verifying the raw part setup. Sub-spindles. Main spindle. Clamping directions. The gripper’s directions on Mr. robot. The load/unload directions, followed by air blow, and you’re all set.

Now with the parameters of the file setup, you are already setting those parameters on all those. You’re just verifying that those are good to go. That’s it. This thing’s ready to run a part as long as that machine’s ready to run the part. All you have to do is hit play.

The user interface is so easy, there’s no need to make a big long video to talk about it. Sorry to you nerds who veg out on long robot videos.”