Tight Tolerances.
Wide-Open Possibilities.
Cutting-edge machining services for your prototype and production products
The Tool Vendor Process: Behind the Scenes
What happens when you order tooling from a tool vendor? Mike visited Iwen Tool Supply to get a behind the scenes look at the process that keeps our machines stocked and ready to roll. Video Transcript: All right everybody, we're back at...
Tool Vendor OR Online Tooling?
https://youtu.be/fjUpNEB7mDE While ordering tooling online may seem convenient, there are many benefits of working with a tool vendor. We visited our tool vendor Iwen Tool Supply and spoke with VP Travis Thayer about how they provide expertise and service beyond what...
How To Align & Adjust A Citizen Swiss Lathe
https://youtu.be/y5katDzByuA We invited Chuck Austerberry from Dynamic Machine to demonstrate how to align and adjust a Citizen Swiss Lathe from start to finish. In this video, we go through each an every step in detail to ensure you know how to accurately and safely...
How To Clean the Advant Edge Spindle
https://youtu.be/z7sA58gaKi8 Is your Advant Edge CNC Tool Dressing Machine getting a little dirty, not operating smoothly, or isn't holding the too, holder quite right anymore? Learn, step by step, how to properly clean yours properly Video Transcript: So, you've had...
Dynamic Milling / Roughing Inconel – What End Mill to Use?
https://youtu.be/WrooTUtjvnQ Thanks to Dave, Kremin’s “favorite” sales guy, the Inconel journey continues. The issue Mike has this time; roughing, or the Dynamic Milling of Inconel on our Haas VF2 CNC Mill. The end mills he’s using keep breaking, plus the edges and...
Slot Milling Inconel With A Micro Endmill
https://youtu.be/t70Vrx8ownY If cutting Inconel is a headache, then slot milling Inconel is a full-blown migraine—at least for Mike at Kremin. Everything he was throwing at this Inconel job on the Haas VF2 CNC Mill wasn’t working, so Trevor brought in the big guns:...
Demonstration – How To Download Programs With Cimco DNC – Max CNC Software
https://youtu.be/KjaBYsOQhdk In today’s Quick Tip, Brad will teach you how to download programs to your CNC machine using Cimco’s DNC-Max software. Video Transcript: If you've seen our product review of the Simco software we recently bought, you know it has helped us...
Product Review – Cimco DNC-Max CNC Software
https://youtu.be/kvgTtl2QtRc Looking for DNC communication software for your CNC machines, Robots, or PLCs for your shop? Kremin can help you narrow it down. We recently picked up Cmico DNC-Max to gain more control over our programs, as well as clean up our electronic...
Quick Tip – Increase Shop Efficiency With One Trick
https://youtu.be/T_0j5gb5QRU It’s way too easy to let your shop get messy. In today’s quick tip, Brad shows you how Kremin just organized their Collet and Guide Bushings to save a TON of time. After all, the more time you spend looking for things, is less time spent...
Quick Tip How To Cut Square Parts Off Round Material
https://youtu.be/h3RxWAX7XJM Sometimes you need to pick off a square part out of round material on a Swiss Lathe. And in this tip, Lance will tell you what kind of collet you need to use, and how to do a phase adjustment with the sub-spindle and the main spindle - a...