Tight Tolerances.
Wide-Open Possibilities.
Cutting-edge machining services for your prototype and production products
Quick Tip – Zero Cost Swiss Speed Increase?
https://youtu.be/31gi9lOL16A When you are cutting thousands of parts on your Swiss Lathe, every second counts. It's always tempting to aim for better feeds and speeds through upgrades, but there are other options you might be missing. In this quick tip, Brad talks...
HAAS UMC 500 RE-Review
Our minds have changed! See our re-review now. Video Transcript: "We received a lot of comments from our UMC 500 review that we posted several months ago [link in description below]. A lot of things have changed since then so I think it's only right that I share with...
How to Change Over a Citizen L32 Swiss Lathe Part 3
The final video in Kremin's 3-part series on how to changeover a Citizen L32 Swiss Lathe. Now it's time to set up our tooling and run a test part to ensure everything is set correctly.
How to Change Over a Citizen L32 Swiss Lathe Part 2
Part 2 of Kremin's series on how to changeover a Citizen L32 Swiss Lathe. In this part, Lance will show you how to properly set the Collet and Guide Bushing, plus loading the automatic bar loader to make its first cut after changing raw material sizes.
How to Change Over a Citizen L32 Swiss Lathe Part 1
If you don't know how to changeover a swiss lathe, today we're going to learn! Part 1 of 3. Video Transcript: "Alright, everybody. Welcome back to Kremin Inc. I'm here with Lance today. We're going to do something a little bit different. We're going to show you how to...
Should You Buy a Used CNC Machine?
When buying a CNC Machine you got two options; go safe and buy new, or go cost effective and buy used. But are used machines worth the risk? Video Transcript: "Buying a new CNC machine is tough, but buying a used CNC machine? Oh my God, that's a whole different world....
How to Calibrate HAAS OTS & Spindle Probes
Want to know how to calibrate a HAAS OTS/tool and spindle probe? We'll take you through each and every step, nothing cut out for time! Video Transcript: "what's up guys this is Trevor for coming again today I'm here with Mike we've been receiving some comments of...
Citizen A32 Swiss Lathe Review
Hear our honest thoughts on the Citizen-Cincom A32 Type 7 swiss lathe. Video Transcript: "Welcome back to Kremin Inc. I'm going to give you my review of the Citizen-Cincom A32 Type 7 swiss lathe. Let's check it out! If you've seen some of my other reviews about our...
How to Calibrate a CMM
At our shop, our boss loves to think that every task can be completed in five minutes, can you you really calibrate a CMM in 5 minutes? Video Transcript: "Ethan! Yeah? The guys need the CMM. Can you calibrate it? Of course. I told them it'll be ready five...
Matrix DLS 8D Review
Our Quality Manager was sick of always trying to gauge the gauge situation in quality control. In response, Kremin brought in the Matrix DLS 8D, an electronic storage drawer that can securely keep track of gauges and tools in the shop! This storage cabinet is a life...